Notifications
Clear all
Topic starter
Refer to the exhibit.
MPLS traffic from 192.168.4.0/24 to 192.168.5.0/24 is failing to pass over the link from R4 to R2.
The engineer verified that:
✑ Cisco Express Forwarding Is enabled on all routers.
✑ All routers reach all networks via OSPF.
✑ MPLS traffic from 192.168.1.0/24 to 192.168.3.0/24 is passing normally over the link from R1 to R2.
Which action resolves the issue?
- A . On router R4, remove the mpls ip command on the s/O/O/2 interface.
B. On router R2, configure the mpls ip command on the SIO/O/4 interface.
C. On router R4, configure the mpls label protocol Idp command on all serial interfaces.
D. On router R2, configure the mpls label protocol Idp command on the interface.
Suggested Answer: B
Posted : 28/12/2022 6:35 pm