Notifications
Clear all
Topic starter
When configuring MPLS VPNI, the administrator configured the command: interface GigabitEthernet0/0/0 ip binding vpn-instance VPN1 Interface GigabitEthernet0/0/1 ip binding vpn-instance VPN2. Which of the following description is wrong?
- A . This configuration command is usually configured on the PE device
B. The function of this command is to bind the G0/0/1 and G0/0\/2 interfaces on the PE device to the VPN instance assigned to the customer network
C. After an interface on the device is bound to a VPN instance, the interface becomes a private network interface, and a private network address can be configured and a private network routing protocol can be run.
D. If you unbind the device from the interface and the VPN instance, it will not automatically clear the IPv4 or IPv6 configuration under the interface bound to the VPN instance.
Suggested Answer: D
Posted : 12/01/2023 10:28 pm