Notifications
Clear all
Topic starter
11/10/2022 11:35 am
The following is the 802.1X access control switch configuration:
[S5720]dot1x authentication-method eap
[S5720-GigabitEthernet0/0/1] port link-type access
[S5720-GigabitEthernet0/0/1] port default vlan 11
[S5720-GigabitEthernet0/0/1] authentication dot1x
Assuming that GE0/0/1 is connected to user 1 and user 2 through the HUB, which of the following options is correct?
- A . After user 1 is authenticated, user 2 can access network resources without authentication.
- B . User 1 and User 2 must be authenticated separately before they can access network resources.
- C . GE0/0/1 do not need to enable dot1X
- D . Neither user 1 nor user 2 can pass authentication and access network resources.
Suggested Answer: A