Notifications
Clear all
Topic starter
20/09/2022 3:14 pm
There is the following bandwidth policy configuration command on Huawei USG6000 products:
[USG] traffic-policy
[USG-policy-traffic] profile class1
[USG-policy-traffic-profile-class1] bandwidth maximum-bandwidth whole both 1000
[USG-policy-traffic-profile-class1] bandwidth connection-limit whole both 20
[USG-policy-traffic-profile-class1] quit
[USG-policy-traffic] rule name policy1
[USG-policy-traffic-rule-policy1] source-zone untrust
[USG-policy-traffic-rule-policy1] destination-zone dmz
[USG-policy-traffic-rule-policy1] destination-address 10.10.10.0 mask 255.255.255.0
[USG-policy-traffic-rule-policy1] action cos profile class1
[USG-policy-traffic-rule-policy1] quit
[USG-policy-traffic] rule name policy2
[USG-policy-traffic-rule-policy2] source -zo ne dmz
[USG-policy-traffic-rule-policy2] destination-zone untrust
[USG-policy-traffic-rule-policy2] destination-address 10.10.10.5 mask 255.255.255.255
[USG-policy-traffic-rule-policy2] action no-qos
Which of the following statements is true? (Multiple Choice)
- A . When accessing the host whose destination address is 10.10.10.5, the number of connections will be limited
- B . Access to the host whose destination address is 10.10.10.5 will not be restricted by the bandwidth policy
- C . When accessing the destination network segment 10.10.10.0/24, it will be limited by the maximum number of connections of 20
- D . When accessing the destination network segment 10.10.10.0/24, it will not be limited by the maximum number of connections of 20
Suggested Answer: BC