by the security gateway device displa ipsec sa command displays the following order information, the information is understood by ______ .
===============================
Interface: Serial0/2/1 path MTU: 1500
===============================
---------------- -------------
IPsec polic name: "1"
sequence number: 1
mode: isakmp
-----------------------------
connection id: 5
encapsulation mode: transport
perfect forward secrec: None
tunnel:
local address: 10.2.1.1
remote address: 10.2.1.2
Flow:
sour addr: 10.1.1.0/255.255.255.0 port: 0 protocol: IP
dest addr: 10.3.1.0/255.255.255.0 port: 0 protocol: IP
[inbound ESP SAs]
spi: 909448761 ( 0x36351639 )
proposal: ESP-ENCRPT-DES ESP-AUTH-MD5
sa remaining ke duration ( btes/sec ) : 1887435204/83
spi: 909448761 ( 0x36351639 )
proposal: ESP-ENCRPT-DES ESP-AUTH-MD5
sa remaining ke duration ( btes/sec ) : 1887435204/83
max received sequence-number: 19
udp encapsulation used for nat traversal: N
[outbound ESP SAs]
spi: 1583842120 ( 0x5e678348 )
proposal: ESP-ENCRPT-DES ESP-AUTH-MD5
sa remaining ke duration ( btes/sec ) : 1887435204/83
max sent sequence-number: 20
udp encapsulation used for nat traversal: N
A . This security policy work in tunnel mode
B. This security policy requires manual configuration of parameters such as keys, SPI , security protocols and algorithms
C. This security policy works in transmission mode
D. This security policy requires the use of IKE dynamic negotiation key, SPI , security protocol and algorithm and other parameters
Notifications
Clear all
Topic starter
Suggested Answer: AD
Posted : 07/11/2022 8:32 am