In the  MSR&nb...
 
Notifications
Clear all

In the  MSR  router configuration command is as follows:

1 Posts
1 Users
0 Likes
84 Views
 Chas
(@heddinschas)
Posts: 712
Noble Member
Topic starter
 

In the  MSR  router configuration command is as follows:

acl number 2001

rule o permit source 19 2.168.2.0 0.0.0.255

acl number 2002

rule o permit source 192.168.3.0 0.0.0.255

acl number 2003

rule o permit source 192.168.0.0 0.0.0.255

#

traffic classifier 2 operator or

if-match acl 2001

if-match classifier 1

traffic classifier 1 operator and

if-match acl 2002

if-match acl 2003

#

traffic behavior 2

filter deny

#

qos polic 2

classifier 2 behavior 2

#

interface GigabitEthernet0/1

port link-mode route

ip address 192.168.1.1 255.255.255.0

qos appl polic 2 0utbound

When the source address are  192.168.2.2.192.168.3.2.192.168.0.2  packets from the port  G0 / 1  forwarding outwardly, the following statement is correct  ____  .

  • A . Packets with the source address of  192.168.2.2  are forwarded normally
    B. Packets with source address  192.168.3.2  are forwarded normally
    C. Packets with the source address of  192.168.0.2  are forwarded normally
    D. three message by the flow are blocked

Show Answer Hide Answer

Suggested Answer:   BC

Explanation:

The  and of ACL  means that the  IP  must meet  2  network segments at the same time , it is impossible
 
Posted : 31/10/2022 3:25 pm

Latest H3C GB0-391-ENU Dumps Valid Version

Latest And Valid Q&A | Instant Download | Once Fail, Full Refund
Share: