Notifications
Clear all
Topic starter
A network engineer has entered the snmp-server user andy myv3 auth sha cisco priv aes 256
cisc0380739941 command and needs to send SNMP information to a host at 10.255.254.1.
Which command achieves this goal?
- A . snmp-server host inside 10.255.254.1 version 3 andy
B. snmp-server host inside 10.255.254.1 version 3 myv3
C. snmp-server host inside 10.255.254.1 snmpv3 andy
D. snmp-server host inside 10.255.254.1 snmpv3 myv3
Suggested Answer: A
Explanation:
The command “snmp-server user user-name group-name [remote ip-address [udp-port port]] {v1 | v2c | v3 [encrypted] [auth {md5 | sha} auth-password]} [access access-list]” adds a new user (in this case “andy”) to an SNMPv3 group (in this case group name “myv3”) and configures a password for the user.
In the “snmp-server host” command, we need to:
+ Specify the SNMP version with key word “version {1 | 2 | 3}”
+ Specify the username (“andy”), not group name (“myv3”).
Note: In “snmp-server host inside …” command, “inside” is the interface name of the ASA interface through which the NMS (located at 10.255.254.1) can be reached.
Explanation:
The command “snmp-server user user-name group-name [remote ip-address [udp-port port]] {v1 | v2c | v3 [encrypted] [auth {md5 | sha} auth-password]} [access access-list]” adds a new user (in this case “andy”) to an SNMPv3 group (in this case group name “myv3”) and configures a password for the user.
In the “snmp-server host” command, we need to:
+ Specify the SNMP version with key word “version {1 | 2 | 3}”
+ Specify the username (“andy”), not group name (“myv3”).
Note: In “snmp-server host inside …” command, “inside” is the interface name of the ASA interface through which the NMS (located at 10.255.254.1) can be reached.
Posted : 10/02/2023 12:07 pm