Notifications
Clear all
Topic starter
Refer to the exhibit.
An engineer attempts to configure a router on a stick to route packets between Clients, Servers, and Printers; however, initial tests show that this configuration is not working.
Which command set resolves this issue?
- A . interface Vlan10
no ipvrf forwarding Clients
!
interface Vlan20
no ipvrf forwarding Servers
!
interface Vlan30
no ipvrf forwarding Printers
B. router eigrp1
network 10.0.0.0 255.255.255.0 network 172.16.0.0 255.255.255.0 network 192.168.1.0 255.255.255.0
C. interface Vlan10
no ipvrf forwarding Clients
ip address 192.168.1.2. 255.255.255.0
!
interface Vlan20
no ipvrf forwarding Servers
ip address 172.16.1.2 255.255.255.0
!
interface Vlan30
no ipvrf forwarding Printers
ip address 10.1.1.2 255.255.255.0
D. router eigrp1
network 10.0.0.0 255.0.0.0
network 172.16.0.0 255.255.0.0
network 192.168.1.0 255.255.0.0
Suggested Answer: C
Posted : 18/11/2022 1:19 pm