Notifications
Clear all
Topic starter
30/07/2022 3:09 am
Refer to the exhibits.
When DMVPN is configured, which configuration allows spoke-to-spoke communication using loopback as a tunnel source?
- A . Configure crypto isakmp key cisco address 0.0.0.0 on the hub.
- B . Configure crypto isakmp key Cisco address 200.1.0.0 255.255.0.0 on the hub.
- C . Configure crypto isakmp key cisco address 200.1.0.0 255.255.0.0 on the spokes.
- D . Configure crypto isakmp key cisco address 0.0.0.0 on the spokes.
Suggested Answer: D
Explanation:
https://www.cisco.com/en/US/technologies/tk583/tk372/technologies_white_paper0900aecd802b8 f3c.html
Explanation:
https://www.cisco.com/en/US/technologies/tk583/tk372/technologies_white_paper0900aecd802b8 f3c.html