Notifications
Clear all
Topic starter
11/09/2022 4:39 pm
Refer to the exhibit.
An engineer has configured DMVPN on a spoke router .
What is the WAN IP address of another spoke router within the DMVPN network?
- A . 172.18.46.2
- B . 192.168.1.4
- C . 172.18.16.2
- D . 192.168.1.1
Suggested Answer: A
Explanation:
From the output we can see there are 2 NHRP Peers. The first one with the NBMA Address of 172.18.16.2 and the “Attribute” (Attrb) of Static (S) so we can deduce it is the Hub device. Therefore the second one must be the remaining Spoke device with the attribute of Dynamic (D).
Explanation:
From the output we can see there are 2 NHRP Peers. The first one with the NBMA Address of 172.18.16.2 and the “Attribute” (Attrb) of Static (S) so we can deduce it is the Hub device. Therefore the second one must be the remaining Spoke device with the attribute of Dynamic (D).
--> S - Static, D - Dynamic, I - Incomplete
N - NATed, L - Local, X - No Socket
# Ent --> Number of NHRP entries with same NBMA peer
NHS Status: E --> Expecting Replies, R --> Responding, W --> Waiting
UpDn Time --> Up or Down Time for a Tunnel
==========================================================================
Interface: Tunnel1, IPv4 NHRP Details
Type: Spoke, NHRP Peers:2,
# Ent Peer NBMA Addr Peer Tunnel Add State UpDn Tm Attrb
----- --------------- --------------- ----- -------- -----
1 44.44.44.4 192.168.100.254 UP 00:03:40 S
1 12.12.12.2 192.168.100.2 UP 00:03:20 D