Notifications
Clear all
Topic starter
04/07/2022 4:55 am
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
- A . Enable NTP authentication.
- B . Verify the time zone.
- C . Disable NTP broadcasts.
- D . Specify the IP address of the NTP server.
- E . Set the NTP server private key.
Suggested Answer: AD
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: Click here
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: Click here