Notifications
Clear all
Topic starter
An engineer must configure OSPF routing on Cisco Nexus 9000 Series Switches. The IP subnet of the Eth 1/2 interface for both switches must be advertised via OSPF. However, these interfaces must not establish OSPF adjacency or send routing updates. The current OSPF adjacency over the interface Eth1/1 on SW1 and Eth1/1 on SW2 must remain unaffected.
Which configuration must be applied to both Nexus switches to meet these requirements?
- A . interface ethernet 1/2
passive-interface default
B. Interface ethernet 1/2
Ip ospf network point-to-point
C. interface ethernet 1/2
ip ospf passive-interface
D. interface ethernet 1/2
no ip ospf passive-Interface
Suggested Answer: C
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/6-x/unicast/configuration/guide/l3_cli_nxos/l3_ospf.html
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/6-x/unicast/configuration/guide/l3_cli_nxos/l3_ospf.html
Posted : 30/11/2022 1:30 pm