Notifications
Clear all
Topic starter
An engineer has deployed a single Cisco 5520 WLC with a management IP address of 172 16.50.5/24. The engineer must register 50 new Cisco AIR-CAP2802I-E-K9 access points to the WLC using DHCP option 43. The access points are connected to a switch in VLAN 100 that uses the 172.16.100.0/24 subnet.
The engineer has configured the DHCP scope on the switch as follows:
Network 172.16.100.0 255.255.255.0
Default Router 172.16.100.1 -
Option 43 ASCII 172.16.50.5 -
The access points are failing to join the wireless LAN controller.
Which action resolves the issue?
- A . configure option 43 Hex F104.AC10.3205
B. configure option 43 Hex F104.CA10.3205
C. configure dns-server 172.16.50.5
D. configure dns-server 172. 16.100.1
Suggested Answer: A
Explanation:
Reference: https://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/97066-dhcp-option-43-00.html
Explanation:
Reference: https://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/97066-dhcp-option-43-00.html
Posted : 16/11/2022 1:36 am